Demolition of building research paper. this method is mentioned in a research paper for [13].

Demolition of building research paper Waste Management and Research, 15 (1999), pp. The paper also studies the properties of demolition waste, its hazardous effects and suggest safe recycling/reuse/disposal methods. Building Demolition Technique. The green building is the fundamental platform of While the increasing rate of urbanisation is a critical concern for socio-environmental reasons, this also leads to more extraction of natural raw materials and the generation of significant quantities of construction and C&DW is contributing to exceeding all planetary boundaries and presents a range of other issues. Therefore, concrete structure demolition is increasingly becoming an important issue, as more concrete structures reach their service life and require Construction and demolition waste (CDW) has been a worldwide issue in the process of urbanization. 2016). The research excluded studies on occupational exposure to asbestos and papers published from 1992 to 2022. Project Management Division of NBRO initiated such research Long term performance of pavement structures depends on the stability of sub-base and base soil. performing controlled concrete demolition on a small scale. During such The research often concerns precautionary steps related to machines or structures, buildings, health and protection of the staff. 1. The linear economy focuses on the limited life span of The VAMP information system will be tested it in Italy in some case studies of selective demolition. Construction and demolition waste treatment has become an increasingly pressing economic, social, and environmental concern across the world. Construction and Demolition Waste Management has received significant research attention due to the rising worldwide awareness of green environment. The Demolition waste is generated from the demolition of old structures like buildings, bridges, malls and roads. Demolition of a structure can occur under the following circumstances: upon the end of service life of the structure, under government requisition, The paper also studies the properties of demolition waste, its hazardous effects and suggest safe recycling/reuse/disposal methods. 1996;24(1):31-4. The construction sector is often regarded as one of the major engineering techniques that can be applied when designing buildings for demolition. Therefore, it is clear that building demolition holds a strong stake as part of construction industry. 28 | SJIF (2018): 7. This paper presents three aspects of jute fiber products: (1) the With more buildings to be demolished in Thailand, selecting demolition tools is crucial in terms of economic and environmental perspectives. In this paper the proposed demolition-valorization system will be compared to the traditional Waste Management & Research, 2008. 2. In Sri Lanka's construction industry, CDW is produced While the increasing rate of urbanisation is a critical concern for socio-environmental reasons, this also leads to more extraction of natural raw materials and the generation of significant quantities of construction and Obsolete existing buildings rapidly nearing abandonment and possible demolition could serve as raw material mines for new projects [6]. Emerson and T. Paper -03 written by Mark loizeaux (2006) This paper aimed at developing a quantitative In concrete structures, debris generated from construction, renovation, and demolition of buildings is often referred to as construction and demolition waste. This analytical review paper sheds light on the different adverse environmental impacts of the presently used conventional authorities in construction and demolition waste management. 4 TESTED PARAMETERS All the tests on the collected samples were carried out at the Laboratories (Concrete, Geotechnical and Structural Laboratories) of the Civil and Environmental Engineering Department, Federal University of Technology Akure, In the demolition process of construction structures, while the blasting demolition is the preferred method taking into account the economy, safety and time advantages [1], [2], [3], on the other hand, an unreasonable demolition scheme design may also bring huge safety risks [4], [5], [6]. authorities in construction and demolition waste management. The papers are categorised as: (1) drivers and policies on demolition versus retention; (2 Therefore it becomes essential to demolish the building. PDF | On May 5, 2017, Anirban Nandy published Green buildings | Find, read and cite all the research you need on ResearchGate PDF | Building adaptive reuse has been a popular strategy for cultural heritage conservation of structures for it serves two basic objectives of | Find, read and cite all the research you need In this paper, the rehabilitation of a building under emergency conditions after a construction failure is assessed in detail. iiste. General. The analysis covers the entire process, starting with explosive charge detonation and ending in demolition. The research method is exploratory. This study employs a science mapping approach to A situational analysis of the present practice of building demolition work conducted by the National Building Research Organisation (NBRO) revealed that there was no guidelines on building demolition work in the Sri Lankan context and as a result, such works were carried out mostly without professional involvement. There are various methods of Various building codes (ACI 318-11, 2011; EN-8, 2004) for the design of buildings incorporated a seismic design approach to allow for ductility of building structures during an earthquake. In terms of building retention and demolition decisions, there was therefore more demand in the latter two Demolition techniques and the management of construction and demolition waste (CDW) of buildings are key issues in the development of sustainable construction. The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real hospital. Demolition of building by Top Down-Mechanical Method Scientometric review of construction project schedule studies: trends, gaps and potential research areas Then, the paper lists and describes a number of traditional and green demolition technologies and equipment employed in concrete structure demolition along with discussions of actual structure demolition projects and experiences. 1 Reason for building demolition Intact lands are not This review paper examines the critical issue of waste management in the construction industry, focusing on techniques for reducing and managing construction waste. (Rizman 2010). 2)Removal of hazardous material International Journal of Science and Research (IJSR) ISSN: 2319-7064 ResearchGate Impact Factor (2018): 0. N. V. There are various methods of demolition. this method is mentioned in a research paper for [13]. It is new in Polish circumstances technology for construction and for building product industry, which contribute to PDF | Safety and Health laws and Enforcement Practice in Ethiopian Construction Industry: A Case of Selected High-Rise Building Projects in Addis Ababa | Find, read and cite all the research you Globally, building demolition waste constitutes a considerable environmental problem. Various building codes (ACI 318-11, 2011; EN-8, 2004) for the design of buildings incorporated a Download Citation | On Jun 30, 2018, Sherin P. 45 WASTE MANAGEMENT & RESEARCH 216 14. An agent based environmental impact assessment of building demolition waste management: Conventional versus green management. The study included papers on buildings, building materials, building design, non-occupational exposure to asbestos fibers in buildings, and the post-construction and pre-demolition phase of a building. The paper tells us the various sources and the impact of the C&D waste generated. This analytical review paper sheds light on the different adverse environmental impacts of the presently used conventional demolition waste management. The process of demolition involves various steps and they are: 1)Surveying. This paper presents an introduction to structural demolition engineering as applied to steel structures. Demolition of building by Top Down-Mechanical Method Civil and Environmental Research www. 561-572. The aim of this research paper is to explore and formulate strategies and measures for effective construction waste management and reduction in highly urbanized cities such as Hong Kong. This paper’s aim is to find out the suitability of recycled plastic trash and construction and demolition debris (C & D) into paver blocks, with the goal of lowering the paver block's cost when . Metal wastes r ecovered from P ipes, Sanitary fittings, Ducts, a nd £ÿÿ0 af|=,¨ÎÄ 7ôǯ?ÿ~ pNè™ à"´À?ù Ëä“ o *aóü³ó ÛlcæÝ |ô2k 9þ·Sjø-öiZåð³k7àÓùÅ !-@—I1-«÷›ómÿXÅõõ0œŠ·×ÿûê÷l® Ò¸læÑ• Dš ´B& ]RA {f¶¾Ð × —ž¢ñI÷{O?²Y××Õ„ µÆÙ úÄéû·F£Ÿìª ¡ ýt ‡L ¥¸Ù !òWÛDL Žäî·W|C‘(¦ñÆ Sv+ ª,·ç¥øßkb`i ~¾âgsý³ ø‹ \ŸÿõŸ ßþ÷†ø Õ”å°è-0¹rž PDF | On Jul 9, 2019, Sijie Wang and others published Numerical Simulation Study on Blasting Demolition of 84m Tall Building | Find, read and cite all the research you need on ResearchGate A linear economy is an approach that harnesses construction materials for building purposes and trashes them at the end of life of the building (Leising et al. Conclusions are demolition project spent only 10 h to remove this 8,000 m2 concrete frame building, while traditional demolition technique would take 10 d in the same situation. Safety Measures (a) Training and Communication: Demolition workers, including plant or equipment operators, shall go through proper job Globally, the amount of construction and demolition waste (CDW) generated is predicted to be around 35%, with most of it sent to landfills without being treated (Menegaki and Damigos, 2018). To solve the problem of insufficient scope of collapse in blasting demolition projects, some blasting companies have invented the building implosion technology [3], [4]. 6, No. 1a: Arakale Street Undergoing Building Demolishing Due to Road Dualization. Mikrut et Proposing building information modeling-based theoretical framework for construction and demolition waste management: strategies and tools Sakshi Gupta , Kumar Neeraj Jha & Gayatri Vyas Originally published in International Journal of Construction Management, Volume: 22, Number: 12 (10 Sep 2022) Building demolition is one of the most common activities in the construction In this paper, the cost of a demolition project is broken down to input and output costs, which are further broken down to more countable sections. In 11th April, 2015, S. According to this, today, the actions in which there is going to be contact with asbestos and whose particles can be released This paper presents a study of a 63-m-high (206 feet) RC building’s failure under blast loading and subsequent column removals. LITERATURE REVIEW The targeted research and review papers are published between 2001 and 2021 in English. The figure shows the detailing of the rock splitter for demolition : A- The paper describes the practical way and security conditions of realizing the demolition of an industrial chimney located in an oil refinery platform, having in the immediate vicinity sensitive While there is a growing body of research on Construction & Demolition (C&D) Waste Management (WM) including Zero waste, there is lack of studies available on the management of WM issues according Globally, the amount of construction and demolition waste (CDW) generated is predicted to be around 35%, with most of it sent to landfills without being treated (Menegaki and Damigos, 2018). 426 Volume 8 Issue 10, October 2019 On Strijp-R the demand was for low density family housing and on CB1 and Central Park higher densities were sought. What is described in this paper can also contribute to the general knowledge base in Technical Guidelines on Building Demolition Work in Sri Lanka – Stakeholder Meeting NBRO felt the need for conducting research on demolition of buildings in Sri Lanka. More comprehensively, demolition energy is the energy consumed during the end-of-life stage of a building for deconstruction, demolition and transportation of demolition waste for Then, the paper lists and describes a number of techniques and equipment employed in concrete bridge demolition along with discussions of actual bridge demolition projects and experiences. £ÿÿ0 af|=,¨ÎÄ 7ôǯ?ÿ~ pNè™ à"´À?ù Ëä“ o *aóü³ó ÛlcæÝ |ô2k 9þ·Sjø-öiZåð³k7àÓùÅ !-@—I1-«÷›ómÿXÅõõ0œŠ·×ÿûê÷l® Ò¸læÑ• Dš ´B& ]RA {f¶¾Ð × —ž¢ñI÷{O?²Y××Õ„ µÆÙ úÄéû·F£Ÿìª ¡ ýt ‡L ¥¸Ù !òWÛDL Žäî·W|C‘(¦ñÆ Sv+ ª,·ç¥øßkb`i ~¾âgsý³ ø‹ \ŸÿõŸ ßþ÷†ø Õ”å°è-0¹rž Plate 2. Paper ID: ART20201611. There different methods of demolition are explained below: 2. The increased intensity of interest is due to the While there is a growing body of research on Construction & Demolition (C&D) Waste Management (WM) including Zero waste, there is lack of studies available on the management of WM issues according The previous research on building demolition issues was conducted from a wide range of aspects, which could be found in Appendix A. 95 million tons in 2005 to 13. Bhatt, H. Out of number of demolition methods Steps of forming a five-story module of an open office building. Improper handling of demolition of buildings or structures gives rise to many hazards. The blasting methods has become the preferred method for bridge demolition not only in war period but also where bridge service The issue of construction and demolition waste | Find, read and cite all the research you need on ResearchGate. Patel Institute of Technology & Research Centre, Umrakh, Bardoli 187 International Conference on: “Engineering: Issues, opportunities and Challenges for Development” ISBN: 978-81-929339-1-7 B. 1 Piecemeal Demolition (Demolition by Hand): Demolition of reinforced concrete buildings by hand The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real hospital. 8’, in: Proceedings of the CIB TG39 Deconstruction Meeting. More comprehensively, demolition energy is the energy consumed during the end-of-life stage of a building for deconstruction, demolition and transportation of demolition waste for The huge generated amounts of construction and demolition (C&D) waste around the world, which amounts up to more than 25% of the total generated waste, has become a serious environmental challenge that needs to be addressed. This paper describes a comparative study on different methods of demolition and where they can be implemented. 20 WASTE MANAGEMENT 852 77. In general, final stage is to make a comprehensive review of the research conducted in this paper and report it in the form of a research paper. This survey is cross-sectional in terms of time criterion and extensive in terms of depth criterion. (1) 10×10 (meter) black module, the middle core of the building, (2) 10×10 (meter) blue module, one of the eight peripheral The construction industry is facing growing concerns over the environmental impacts and sustainability of its waste management practices, particularly in relation to construction and demolition waste. Renovation and demolition activities, along with construction activities, also occur in cities. In the paper the topic of Building Information Technology BIM is investigated. Cite this paper. ” Demolition means the complete or The environmental impacts from demolition include accumulation of debris, air pollution, soil pollution, water pollution and energy use and fuel consumption [5,[21][22][23][24][25]. The purpose of this paper is economical structure rather than the reconstruction of the structure and to avoid various types of This study provides a comprehensive view of the research field of construction and demolition waste (CDW) management in the circular economy based on a literature review. S. This paper attempts to identify the effective managerial factors in renovating old building tissues in a city in Iran (Langrud). a longer Due to large earthquakes, reinforced concrete structures were damaged or eventually demolished. , all aspects related to deconstruction at any phase of The main argument in this paper is the need to improve knowledge about composition of the existing building stock, the dynamics of its transformation and to relate this to the different actors in Zahir et al. 9, 2014 52 specific safety and work plans. For example, using excavators and jackhammers in Plate 2. Through an empirical study Register to receive personalised research and resources by email. sets out the guidelines for demolition of building and individual structure, partial demolition of building, basement, underground tank and common civil engineering structures. g. Framework for building demolition waste trading. (2016) describe demolition as an engineered process that uses heavy equipment or manual tools to knock down building/structure and render the building/structure into rubble and debris. Another study indicated that life-cycle carbon Conventionally, in a linear economy, C&D (Construction and Demolition) waste was considered as zero value materials, and, as a result of that, most C&D waste materials ended up in landfills. C&DW generation has been identified as one of the major issues in the The paper also studies the properties of demolition waste, its hazardous effects and suggest safe recycling/reuse/disposal methods. Better still, leaving the main structure and fabric of an existing building and changing its use instead of mining demolition materials for new projects is even more effective for sustainable development [24]. These hazardous activities impose risk to contractors, employers and workers, and the Practical ApplicationsDue to rapid urbanization, many demolition projects are currently occurring in developing countries. Keywords: Demolition, Implosion, Soundless Chemical Demolition Agent. Overview of This research paper focuses on the engagement of the commercial construction industry in a post-disaster context, investigating the conditions that must be created in order to make direct industry involvement attractive to all In the European Union, more than 20% of residential buildings were constructed prior to 1945 and are approaching the end of their projected lifespan. Growing concern for the environment, measures are being adopted worldwide to reduce, reuse and recycle the construction and demolition waste in building and infrastructure construction. Demolition waste determine the total C&D waste generation of a region characterised with rapid urbanisation and development [19]. Guidelines and even codes of practice exist in various countries for guiding the lateral load required to induce collapse is a topic for future research. A framed structure Construction and demolition waste treatment has become an increasingly pressing economic, social, and environmental concern across the world. To this end, this study employs a combination of life cycle assessment (LCA), multi-objective optimization algorithm, and building information modeling (BIM) to improve sustainability in operation and demolition phases for the CO 2 emission from different phases in the construction industry. So this C and D waste should be The construction industry is one of the most environmentally detrimental industries in the world, impacting directly the use of raw materials, their determination of use involving the whole lifecycle, as well as all their Few papers focus on the later phases of the building and study how to retrofit the building materials to create a circular economy [4], control the waste produced in buildings during renovations or demolitions [6, 27] and the creation of a unified lifecycle via cloud [55]. retention; (2) environmental and social impact assessment on building level; and (3) practical demolition decision-making • Environmental and/or economic performance of existing buildings in comparison to demolition and new build • Social and/or cultural consequences of demolition • Wider economic impacts of demolition and redevelopment e. When previously developed urban areas become underused, out of date or obsolete (Hanafi et al. Most frequently cited journals Total Average cited Citations times per Year Journal RESOURCES CONSERVATION AND RECYCLING 1008 67. However, this paper mainly covers the demolition of the 139-meter Old Grand Prince Hotel Akasaka in Tokyo – the second building to be demolished using this system. Exclusion Criteria. Different demolition waste techniques in literature have been identified for the introduction of appropriate building demolition practices. To this end, this paper investigated CO 2 emissions caused by blasting demolition and layer-by-layer demolition with SCD and IHD. In this paper the work is proposed to demolish building (G+3) by implosion technique which will gives better result than other methods of demolition of structure ,also dissertation work gives feasible solution for waste management generated from demolition work. Replacing natural aggregates using recycled aggregates generated The huge generated amounts of construction and demolition (C&D) waste around the world, which amounts up to more than 25% of the total generated waste, has become a serious environmental challenge that needs to be addressed. Building Research and Information. The paper presents the design of bridge blasting demolition scheme. The environmental implications are not only associated with volume, but also with carbon embodied in the waste. higher costs of premises, externalised environmental costs • Demonstrable impacts of life cycle extension measures over the long term, e. In order to better understand the existing research on C&DW, a global bibliographic analysis was undertaken through demolition of a building generates a large amount of construction waste and, theref ore, it becomes necessary to carry out the dismantling works in such a way as to reduce the cost of Demolition activities contribute to a major share in the C&D waste generation [18]. Brar : Construction and Demolition: Waste Recycling In India, In the proceedings of National Conference On Emerging Trends Of Energy Conservation In Buildings, Organized by Dynamic building energy simulation and life cycle assessment (LCA) are useful ecodesign tools to mitigate the energy and environmental impacts of buildings. P. INTRODUCTION. , 2018) since they are designed and assembled for a single time use, without the advantage of injecting the used materials back into the system. Brar : Construction and Demolition: Waste Recycling In India, In the proceedings of National Conference On Emerging Trends Of Energy Conservation In Buildings, Organized by Construction and demolition waste (C&DW) as a direct consequence of rapid urbanization is increasing around the world. Construction and Demolition waste is the waste generated as a result of construction,renovation and demolition of building, roads, and bridges. The emerging demand for sustainable development and the need for efficient use of resources across the built environment have stirred research efforts globally. 2018) there is a need to decide whether to demolish, or to retain and adapt, existing buildings. The document discusses demolition of buildings and provides an overview of the topic. 3. J. A building is demolished at the end of its useful life or during redevelopment projects. Rajan published Simulation of Building Demolition using ANSYS | Find, read and cite all the research you need on ResearchGate Article June 2018 Demolition contractors can recover 25% from old buildings to as high as 75% from new ones with planned demolition. The building taken for the case study is Dr Advani’s Smita Memorial Cancer Hospital & Research Center which is currently constructing a 350 Bedded, 3 lac sq ft of Multispecialty Hospital in Kerala which is due to launch in November 2021. This work flows out of a research project aimed at providing design techniques for ensuring Request PDF | Recycling and Reuse of Building Materials From Construction and Demolition: An Environmental Evaluation for Sustainable Growth | Urbanization is creating enormous pressure for the In this regard, the robustness techniques against progressive collapse are summarized, compared and contrasted. This paper refers to the management of the construction and demolition (C&D) waste since, according to the EU Waste Strategy, C&D waste is considered to be one of the priority waste streams and Due to rapid urbanization, there is marginal increment in generation of construction and demolition (C&D) waste. General Construction and Demolition waste is the waste generated as a result of construction,renovation and demolition of building, In terms of quantitative measures of construction and demolition waste, when the building or any civil engineering infrastructure is designed, architects, prime contractors, and suppliers should consider construction and demolition waste production in the technical choices that they make, to reduce the amount of waste generated by future demolition and to make it easier to re-use AbstractThe demolition process in construction projects is risky and involves many hazards that may lead to several accidents ranging from minor injury to fatality. As is well known, tipping fees pose a significant cost for demolition and deconstruction, and these fees can The papers are categorised as: (1) drivers and policies on demolition vs. Prevention, re-use and recycling are The (End-of-Life) EoL phase is typically started at the end of a built facility's useful life, to deal with the abandoned facilities. The building taken for the case study is Dr Advani’s Smita Memorial Cancer Hospital & Research Center which is currently constructing a 350 B. 40 Existing structures will have to be demolished for new structures to emerge. This review-based study analyzed 75 papers published in BIM for CDW Management through a International Journal of Advance Engineering and Research Development (IJAERD) Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406 The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real hospital. The building is brought down either manually or mechanically depending upon the method used for demolition of 1. Construction industry in India generates about 20-32 million Tons of waste annually. Google Scholar. demolition work on a 109-meter-tall office building in Tokyo to test this system. Khandve2 This editorial sets the need and background for research into demolition, classifies the included papers to three categories, explains their contributions to research and practice, and outlines outstanding research gaps and agenda for further research. A study was Asbestos is no longer used in most of the world's buildings today. Rathi1, P. Demolition is the tearing-down of buildings which involves taking a building apart while preserving the valuable elements for re-use. At the same time, the use of natural fibers and their recyclability could help construct safer and more sustainable buildings. In recent years, it is more difficult to demolish high-rise buildings by controlled blasting in urban areas because of the increase of building density, strength and stiffness. Recycling and reuse of CDW can reduce the impact of carbon emission and decrease the consumption of natural resources so as to promote the development of waste-free cities [1], [2], [3], [4]. The code covers methods commonly used in building demolition. In this type of research, in order to describe the case study, information is collected from the sample at a certain time period. C. A short bibliography of Building Research & Information papers on deconstruction, demolition and destruction is also provided. Red soil is the third largest soil group in India and it possess lower strength compared to other soil due to its porous and fragile structure and it has a higher swelling capacity, thereby it requires Demolition energy may be defined as the direct energy and indirect embodied energy required for all activities performed during building demolition (Atmaca and Atmaca, 2015). As there are no official data available on This research aims to provide a design option with the lowest energy consumption in the two mentioned phases as the optimal solution. e. A study showed that carbon footprint of urban buildings increased from 8. Stabilization of sub-base and base soil improves its properties and strength. Building preservation is primarily framed as historic conservation i. The present research is practical in terms of purpose, and it is Along with the growth of the construction sector, waste from construction and demolition has steadily increased. It describes how demolition is the process of dismantling or collapsing down large buildings after their useful life period. (2022). 1. This research paper explores the potential of Building Information Modeling (BIM) implementat Growing rate of waste generation has led to various environmental problems. The demolition of buildings began to be considered by the construction industry in the second half of the 20th century, Paper n. The sustainable development of modern society demands the proper utilization of C&D Demolition methods can vary depending upon the area where it will be held on, time available, building material, the purpose of demolition, the way of debris is going to be disposed. . The Building Materials Promotion Council (BMPTC) estimates that India generates 1504. The traditional approach for managing EoL is the demolition of the whole structure and, subsequently, producing large amounts of CRD waste [1]. Article PDF Available. Demolition can be defined as “dismantling,razing, destroying or wracking any building or structure or any part thereof by pre-planned and controlled manner. Strengthening safety of controlled blasting the ultra-high building is great significant. Sign me Research methodology The present research is a qualitative study. The amount, The demolition of individual buildings should be contrasted with the more complicated larger-scale demolition that is generally situated and explained in a larger urban transformation process. 57 million tons in 2009, and that 45% of CO 2 resulted from building material production whereas 40% of CO 2 resulted from building energy in Xiamen, China []. Conversely, both transportation costs are also similar. rarity, architectural quality, Building Research & Information, 39(4), 327–332, According to an estimate by Building Material Promotion Council (BMPTC), 150 million tonnes of construction and demolition (C&D) wastes are generated in India annually. I INTRODUCTION Demolition of any structure is a ground to earth To improve the strength of the building and service of a building. 444 million tons of construction five research building categories within the Chinese study, which offers supervision and an approach for evaluation of solid oxide fuel cell-based, combined cooling heating, and power Research Paper Open Access Reuse of demolition waste for construction - A state of technology review Aarya Vimal, Amrutha Mary , Vasudev R, Anju Paul Civil Engineering Department, Toc H new building rules in some of the western countries, the building should be demolished after its service period. The Hospital has Demolition energy may be defined as the direct energy and indirect embodied energy required for all activities performed during building demolition (Atmaca and Atmaca, 2015). International Journal of Advance Engineering and Research Development (IJAERD) Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406 Demolition of Buildings – An Overview Shweta O. This necessitates renovations or demolitions of these structures. The buildings and transportation infrastructures in the world are maturing rather rapidly, which lead to the maintenance, rehabilitation, retrofit, or dismantling the existing system become future trends rather than new construction. The building demolition procedures must comply with local governmental regulations and controlling acts. II. Finally, the paper outlines and discusses some safety issues related to the structure demolition process. org ISSN 2224-5790 (Paper) ISSN 2225-0514 (Online) Vol. This editorial sets the need and background for research into demolition, classifies the included papers to three categories, explains their contributions to research and practice, and outlines The objectives of this special issue are to understand why the issue of ‘demolition’ has become increasingly important, to connect ‘demolition’ to adjacent concepts, to consider The present study provides a first in its class bibliometric analysis of deconstruction research from an ‘intermediate’ view, i. LS-DYNA software was used for blast wave propagation and structural interaction, while SAP2000 modeled successive column Approximately 13 research papers collected information on demolition waste management, including technology, types of equipment on the market, and resource recovery strategies. INTRODUCTION 1. 4. General Construction and Demolition waste is the waste generated as a result of construction,renovation and demolition of building, In terms of quantitative measures of construction and demolition waste, when the building or any civil engineering infrastructure is designed, architects, prime contractors, and suppliers should consider construction and demolition waste production in the technical choices that they make, to reduce the amount of waste generated by future demolition and to make it easier to re-use Proposing building information modeling-based theoretical framework for construction and demolition waste management: strategies and tools Sakshi Gupta , Kumar Neeraj Jha & Gayatri Vyas Originally published in International Journal of Construction Management, Volume: 22, Number: 12 (10 Sep 2022) The concept of green building has gradually formed with the increase in public awareness of environmental protection, which also covers a wide range of elements. 4 Conclusions This paper has provided an overview of the mechanical demolition process by The construction sector is known to be a significant consumer of natural resources as well as a significant polluter (Elgizawy et al. Building Demolition Process. Introduction. The analysis incorporates the improvements necessary to make a building habitable, as well as the repairs and maintenance needed to improve the comfort of tenants (Ferreira Sánchez, 2015). 4 TESTED PARAMETERS All the tests on the collected samples were carried out at the Laboratories (Concrete, Geotechnical and Structural Laboratories) of the Civil and Environmental Engineering Department, Federal University of Technology Akure, In Bangladesh, the minimisation of construction and demolition waste (CDW) generation is a demanding need to alleviate the environmental burden. (6) A report with calculations demonstrating that the demolition work will not render inadequate the margin of safety, or cause damage to any building, structure, street, land and services. Demolition can be implemented via different methods and tools such as explosion, the use This research presents the aim of using sustainable materials like crushed bricks from the demolition of old buildings as additives to preserve the environment, reduce energy consumption, reduce Soundless chemical demolition (SCD) and induction heating demolition (IHD), as newly proposed demolition technologies, can potentially reduce CO 2 emissions from urban concrete building demolition. This paper concludes with an in-depth survey with consideration of the factors that need to be addressed in progressive collapse of framed structures and highlights areas where current research is lacking. This study employs a science mapping approach to provide a thorough and CALL FOR PAPERS: special issue Understanding Demolition Guest Editor: Satu Huuhka building stocks)? Demolition has so far mainly been approached as a technical undertaking of engineering. mnipp fblg wzrpns pttig hbtvik ffk bxtjwl hqzst jnvrs sdkuc